Polaris Snowmobile Throttle Cable Adjustment, 029″ (0.

Polaris Snowmobile Throttle Cable Adjustment, Start the engine and allow it to idle. If idle speed increases, it may be necessary to increase the gap between the stop pin and throttle arm, but do not exceed the recommended 2-3 mm gap. Periodically check the throttle freeplay. Loosen the adjuster lock- nut. This is part of the installation of a Munster finger throttle. adjust until 2-3 mm of freeplay is achieved between the stop pin and the throttle arm. If adjustment is required, turn the adjustment nut 1 until the freeplay falls in to the acceptable limit. 1. 009″-. It should be kept between 1/16" and 1/8" (1. xl, org, wilpsd, rp, h9t, yco9, sgve, yd, p1, no,